CINT on IRIX64

victor perevoztchikov (perev@mail.phy.ornl.gov)
Tue, 24 Mar 1998 16:02:55 -0500 (EST)


Dear Masa,

I have installed ROOT/CINT on IRIX64. I did it with mode -32
which compatible with SGI IRIX 5.3 machine :
short = 2 bytes
int = 4 bytes
long = 4 bytes
float = 4 bytes
double = 8 bytes
pointer = 4 bytes

But default mode there is -n32 and CERNLIB compiled with this mode.
These modes (-32 and -n32) are incompatible one with other. As a result
you can not link CERNLIB with ROOT.

I tryed to install ROOT/CINT with -n32 mode.
Compilation and link OK. But when I run CINT

cint> printf("ASDF")
Error: printf param[0]=0 must not be 0 FILE:/var/tmp/aaaa004vV LINE:1
*** Interpreter error recovered ***
cint>

This happens not only with printf but with any function.

So for CINT is something different on IRIX64. What it coud be?

Sizes of all types are the same for -32 and -n32.

Thank you in advance.

Cheers Victor

-- 
-------------------------------------------------------------------------
Victor M. Perevoztchikov         perev@mail.phy.ornl.gov    [ US
				 perev@bnl.gov              [ US
                                 perev@vxcern.cern.ch       [ CH
                                 perev@mx.ihep.su           [ RUS

Brookhaven National Laboratory MS 510C PO Box 5000 Upton NY 11973-5000 Phone: 516-344-7107 FAX: 516-344-3253 Oak Ridge National Laboratory, MS 6374, Oak Ridge, TN 37831 (423-574 5928) Fax (423-576 5780) University of Tennessee, Knoxville, TN 37996-1200 (secre-at 423-974 3342)